1
/
of
6
Gray Dragon Airsoft
Valken LiPo 7.4v 250mAh 25C HPA Airsoft Battery (JST)
Valken LiPo 7.4v 250mAh 25C HPA Airsoft Battery (JST)
Regular price
$14.95 USD
Regular price
Sale price
$14.95 USD
Shipping calculated at checkout.
Couldn't load pickup availability
Valken LiPo 7.4V 250mAh 25C HPA Airsoft Battery (JST)
The Valken LiPo 7.4V 250mAh 25C HPA Battery is a compact power solution made for HPA engine setups that need dependable, consistent output. With a 25C discharge rate and a secure JST connector, it’s built to drop into compatible builds without drama.
7.4V LiPo 250mAh 25C Output JST Plug HPA Engine Battery
Shipping Restriction: CANNOT SHIP VIA AIR. Ships within the United States via ground only.
Operation Instructions
- Fully charge the battery before first use.
- Use a LiPo / Li-ion balance charger only (do not use a NiMH charger).
- Connect charger power (AC/DC), then plug into a wall outlet.
- Connect the battery using the XH balance connector and verify correct polarity.
- Charge inside a lithium battery safety bag.
- When fully charged, disconnect the battery first, then unplug the charger.
Warning
- Never leave charging batteries unattended.
- Charge only one battery pack per charger at a time.
- Use only an appropriate LiPo/Li-ion charger to reduce risk of fire or injury.
- Charge on a stable, heat-resistant, non-flammable surface away from flammables.
- Stop charging immediately if you notice swelling, damage, heat, or malfunction.
California Prop 65: Cancer and Reproductive Harm — www.P65Warnings.ca.gov
Specifications
| Configuration | Brick (2 cells) |
| Voltage | 7.4V |
| Capacity | 250mAh |
| Discharge | 25C |
| Dimensions | 42mm × 23mm × 12mm |
| Plug Type | JST |
| Balance Plug | BMS / XH 3-pin |
| Compatibility | Valken V12 Engine / Wolverine Inferno Engine / PolarStar Fusion Engine |
| Charger | Not included |
Caution: Inspect battery and charger before every use. Do not use if damaged or shorted. Keep away from liquids and out of reach of children. Do not expose to temperatures above 160°F or leave in a closed vehicle.
Warranty Support: For warranty, service, or repair help, visit: Valken Help Center
Share
