Valken LiPo 11.1V 2000mAh 15C/25C Triple Split Airsoft Battery

The Valken LiPo 11.1V 2000mAh 15C/25C Triple Split Airsoft Battery is built for players who want strong, consistent output and easy fitment. The triple split layout is made to tuck cleanly into crane stocks and many PEQ-style battery boxes, giving you flexibility without sacrificing power.

With no memory effect, it can hold a charge for months (stored properly), so you’re not stuck topping off every time you want to play.

Key Features

• Voltage: 11.1V
• Capacity: 2000mAh
• Discharge Rate: 15C continuous / 25C burst
• Connector: Small Tamiya
• Balance Plug: XH 4-pin (for 3-cell / 11.1V packs)
• Design: Triple split for crane stocks & PEQ boxes
• No memory effect: No required “full discharge” cycling

Operation Instructions

1. Always fully charge your new battery before first use.
2. Use a LiPo/Li-Ion smart charger only. Do not use a NiMH charger.
3. Connect the charger to a wall outlet, then connect the battery using the balance (XH) connector as required by your charger.
4. Charge in a LiPo safety bag on a stable, non-flammable surface.
5. When fully charged, disconnect the battery from the charger before unplugging the charger.

Warning

• Never leave charging batteries unattended.
• Never charge more than one battery pack at a time on the same charger output.
• Only use compatible chargers for LiPo/Li-Ion packs — incorrect chargers can cause fire, injury, or damage.
• Charge on a non-flammable, heat-resistant surface (not carpet, beds, car seats, etc.).
• Stop charging immediately if you notice swelling, heat, damage, or malfunction.
• Do not modify, puncture, or open the battery pack.

Caution

• Inspect the battery and charger before use. Do not use if damaged or shorted.
• Do not expose LiPo/Li-Ion batteries to temperatures above 160°F.
• Do not leave batteries in a closed vehicle.
• Do not use extensions/adapters not intended for your charger.
• Keep batteries away from liquids and out of reach of children.
• Service/modification should only be done by qualified dealers/manufacturer.

Do Not Charge These Battery Types

• Lead Acid / VRLA
• NiMH or NiCd packs
• Non-rechargeable batteries (explosion hazard)
• Faulty or damaged batteries
• Packs made from mixed cell types
• Anything other than LiPo or Li-Ion packs

Technical Specs

Warranty Information

For warranty support, service, or repair assistance, please visit Valken.com and use the Valken Help Center.