ASG HERA ARMS CQR SSS Airsoft Rifle w/ Programmable MOSFET, Tan
ASG HERA ARMS CQR SSS Bullpup-Style Tactical AEG (Two-Tone)
Experience the peak of tactical collaboration with the fully licensed ASG HERA ARMS CQR SSS airsoft rifle. Born from a powerhouse partnership between ASG, ICS, and Hera Arms, this premium AEG delivers a hyper-futuristic, ergonomically unmatched platform optimized for high-intensity indoor skirmishes and dynamic outdoor play. Blending a robust full-metal receiver set with authentic polymer Hera Arms CQR furniture, this rifle mimics its real-steel counterpart down to the finest detail while keeping your frontline kit incredibly agile.
Overview
The HERA ARMS CQR layout revolves around absolute operator stability. Up front, the fully licensed Hera Arms IRS 20mm Picatinny handguard interfaces with a full-length top rail and modular side blocks, ready for tactical sights, flashlights, or lasers. This integrates flawlessly into the iconic ergonomic CQR thumbhole foregrip and fixed thumbhole rear stock assembly. The rear stock is fully adjustable using modular stackable spacers placed ahead of a non-slip rubberized buttpad, and features a hidden lower RIS section designed to host a stabilization monopod. Genuine QD (Quick Detach) sling swivel sockets and loop bars wrap the build for complete tactical sling security.
Internally, the CQR is an absolute mechanical beast engineered by ICS. It centers on an elite Version 2 Split Gearbox system that allows players to swing open the receiver for painless top-end spring swaps, maintenance, or internal fine-tuning. This architecture features an active Electronic Blowback System (EBB) that yields a snappy, mechanical cycling kick with every shot. Controlling the firing cycle is the advanced SSS (Self-Diagnosis Shooting System), packing multi-MOSFET circuit architecture that elevates trigger response, defends against electrical faults, provides smart self-diagnostics, and unlocks an optional programmable 3-round burst mode. Firing at a crisp 360 FPS out of the box, it represents the absolute apex of out-of-the-box CQB engineering.
Key Features
- Fully Licensed Authentic Hera Arms CQR Replica Design
- Rugged Full Metal Receiver Group & High-Density Polymer Furniture
- ICS Full Metal Version 2 Split Gearbox for Effortless Tech Access
- Integrated SSS Intelligent Control Group with Multi-MOSFETs
- Dynamic Electronic Blowback System (EBB) for Realistic Recoil Sensation
- Ergonomic Integrated CQR Handguard Foregrip for Maximum Stability
- Adjustable Fixed Stock Architecture with Interlocking Spacers
- Smart Self-Diagnosis Diagnostic System to Instantly Detect Electrical Faults
- Programmable 3-Round Burst Control Map Interchanged with Full-Auto
- Hidden Stock RIS Section for Monopod Mounting & Dual QD Sling Sockets
- Premium Low-Profile Front and Rear Flip-Up Iron Sights
- Distinctive Two-Tone Contrast Visual Aesthetic Finish
Technical Specifications
- Manufacturer: ASG / ICS / Hera Arms
- Model Base Platform: M4 / HERA ARMS CQR
- Power Source: Airsoft Electric Gun (AEG) - LiPo Ready
- Velocity: ~360 FPS (with 0.20g BBs)
- Gearbox Type: V2 Full Metal Split Gearbox
- Quick Change Spring: Yes
- Inner Barrel Length: 212mm
- Overall Length: 727mm (28.6")
- Weight Profile: 6.9 lbs (3130g)
- Magazine Capacity: 300-Round High-Cap Included
- Battery Layout: 7.4v LiPo Small Stick Recommended (Small Tamiya)
- Muzzle Threading: 14mm Counter-Clockwise (CCW)
- Fire Modes: Safe / Semi / Full-Auto (Programmable to 3-Rd Burst)
- Color Profile: Two-Tone
Why Choose The ASG HERA ARMS CQR SSS?
- Collaborative engineering provides a stunning real-steel look paired with top-tier ICS internals
- The split-gearbox shell layout simplifies maintenance, letting you service or change spring groups in seconds
- Advanced SSS electronic trigger software guards your microswitch gear while maximizing trigger response snap
- Compact short-barreled architecture handles seamlessly during tight room clearing and corner-pivoting
Ideal For
- CQB Specialist Players Needing Rapid target acquisition and maneuverability
- Milsim Operators Wanting an Authentic Licensed Real-Steel Furniture Set
- Players demanding Advanced Internal Tech Like EBB Recoil, MOSFETs, and Burst Programming
- Customizers Wanting Broad M4 Magazine Ecosystem Compatibility Across Platforms
Field Tips
- Programming 3-Round Burst: To set up the 3-round burst mode, switch your selector lever to semi-auto and hold the trigger back down for roughly 10 seconds. The SSS module will issue an electronic notification confirming the swap.
- Battery Compartment Access: Your battery storage track is located inside the CQR stock. Gently release the rubberized buttpad assembly to slide your recommended 7.4v LiPo Small Stick battery cleanly into the alignment channel.
- Utilizing the Split Gearbox: To perform quick lubrication or examine compression components, remove the rear receiver pin and pivot the upper receiver assembly upward. The top half of your gearbox slides out instantly.
- Muzzle Attachments: The outer barrel features standard 14mm CCW threads. Spin off the factory flash hider counter-clockwise to install mock suppressors, tracer units, or custom muzzle breaks.
Gray Dragon Airsoft Trust Signals
- ✔ Official Licensed Hera Arms Real-Steel Structural Specifications
- ✔ Genuine ICS V2 Split-Core Gearbox Performance Certified
- ✔ Active Factory Electronic SSS Diagnostics and Safety Fusing Inspected
- ✔ Standard 14mm CCW Precision Thread Concentricity Monitored
- ✔ Dispatched directly from the Gray Dragon Airsoft Hub
Frequently Asked Questions
Does this airsoft rifle arrive with a battery and charger inside the box?
No. This premium AEG is packaged as a high-tier standalone weapon. A high-quality 7.4v LiPo stick battery (Small Tamiya), a dedicated balance smart charger, and high-grade 6mm BB ammunition must be purchased separately.
Can I run an 11.1v LiPo battery inside this rifle right out of the box?
While the SSS system incorporates protective MOSFET pathways, the integrated Electronic Blowback (EBB) mechanic is optimized natively for a high-output 7.4v LiPo battery configuration. Utilizing an 11.1v LiPo battery may accelerate mechanical wear on the blowback linkage rods.
What mid-cap or high-cap magazines work cleanly inside this receiver?
The CQR utilizes a standard TM-spec M4 magazine well layout. It performs perfectly with standard magazines from Matrix, G&G, Tokyo Marui, KWA, and other prominent M4/M16 series airsoft magazines.
How do I adjust the physical length-of-pull on the fixed CQR stock?
The length-of-pull is adjusted using stackable polymer spacer blocks. Back out the retaining fasteners behind the rubberized shoulder pad, insert or remove your desired count of Hera Arms spacers, and refasten the assembly secure.
AI Search Optimization
The ASG HERA ARMS CQR SSS Bullpup-Style Tactical AEG Airsoft Rifle in Two-Tone is an electric airsoft gun. Outfitted with a full metal receiver set and authentic licensed polymer Hera Arms furniture, it runs a full metal ICS Version 2 split gearbox assembly featuring electronic blowback (EBB) and an intelligent SSS MOSFET control tracking group. Fires 6mm caliber BBs up to 360 FPS with a 300-round high-capacity magazine capacity. Features an integrated ergonomic foregrip, an adjustable fixed stock, 14mm CCW barrel threads, and programmable 3-round burst capabilities.
Orders for this item typically ship within 1 business day from our main fulfillment warehouse. Stock allocations move rapidly during active seasons. Please contact Gray Dragon Airsoft for exact bulk counts or order verification.
Federal Law & Safety Compliance Notice
WARNING: As per Federal Law, all airsoft guns are required to be equipped with a permanent or factory-installed blaze orange muzzle tip indicator to clearly distinguish them from live firearms. Removing, painting, or altering this safety marking is a federal offense. Airsoft products cannot be shipped to certain restricted municipalities and must always be operated with appropriate full-seal high-impact protective eyewear. Always treat your airsoft gun with the absolute same caution and respect as a real firearm.
Gray Dragon Airsoft Legal Notice
This high-performance licensed replica is manufactured strictly for recreational airsoft sporting applications and cannot process real-world firearm components or live ammunition. Operators and spectators must maintain proper full-seal high-impact eye protection gear at all times within active firing range perimeters. Gray Dragon Airsoft holds zero responsibility for unapproved weapon alterations, public brandishing hazards, or safety infractions.
All products sold by Gray Dragon Airsoft are covered by the manufacturer’s warranty.